How can I use multiple queries on a single board?

[Samiksha Ardu]

I want to configure in such a way that I want two/ three queries pulling data to the single board

[John C · Accepted solution]

Hi @Samiksha Ardu .  Welcome! 

Yes, it is possible to do this.  You can create a Scrum or Kanban board from either a new project, an existing project or a saved filter/query.

Create the filter first and save it.  If you need to combine the results of multiple filters you can do that by referring to them in the JQL as follows:

filter = "FilterA" or filter = "FilterB" or filter = "FilterC"

(or similar...check the output matches what you expect to see)

Once the filter is saved, go to the Boards area and create a new Scrum or Kanban board based on the filter you just created.

[Samiksha Ardu]

@John Connolly  Thankyou it worked. Much appreciated

[Martin Bayer _MoroSystems_ s_r_o__ · Accepted solution]

Hi @Samiksha Ardu , you can't set multiple filters as a configuration of a single board, but you can prepare query which consists of results of multiple filters, so it can be like:

• filter = 10012 OR filter = 10005

where 10012 and 10005 are IDs of two other filters.

Let me know, if you need more information

[Samiksha Ardu]

Thankyou @Martin Bayer _MoroSystems_ s_r_o__  sounds cool. I tried and it worked so thanks a ton.

[Martin Bayer _MoroSystems_ s_r_o__]

Happy to help @Samiksha Ardu ;)